Starting - reading configuration files ...
reread_config:  reading radiusd.conf
Config:   including file: /usr/local/etc/raddb/proxy.conf
Config:   including file: /usr/local/etc/raddb/clients.conf
Config:   including file: /usr/local/etc/raddb/snmp.conf
Config:   including file: /usr/local/etc/raddb/eap.conf
Config:   including file: /usr/local/etc/raddb/sql.conf
 main: prefix = "/usr/local"
 main: localstatedir = "/var"
 main: logdir = "/var/log/radius"
 main: libdir = "/usr/local/lib"
 main: radacctdir = "/var/log/radius/radacct"
 main: hostname_lookups = no
 main: snmp = no
 main: max_request_time = 30
 main: cleanup_delay = 5
 main: max_requests = 1024
 main: delete_blocked_requests = 0
 main: port = 0
 main: allow_core_dumps = no
 main: log_stripped_names = no
 main: log_file = "/var/log/radius/radius.log"
 main: log_auth = no
 main: log_auth_badpass = no
 main: log_auth_goodpass = no
 main: pidfile = "/var/run/radiusd/radiusd.pid"
 main: user = "(null)"
 main: group = "(null)"
 main: usercollide = no
 main: lower_user = "no"
 main: lower_pass = "no"
 main: nospace_user = "no"
 main: nospace_pass = "no"
 main: checkrad = "/usr/local/sbin/checkrad"
 main: proxy_requests = yes
 proxy: retry_delay = 5
 proxy: retry_count = 3
 proxy: synchronous = no
 proxy: default_fallback = yes
 proxy: dead_time = 120
 proxy: post_proxy_authorize = yes
 proxy: wake_all_if_all_dead = no
 security: max_attributes = 200
 security: reject_delay = 1
 security: status_server = no
 main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
Using deprecated naslist file.  Support for this will go away soon.
read_config_files:  reading clients
read_config_files:  reading realms
radiusd:  entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec 
 exec: wait = yes
 exec: program = "(null)"
 exec: input_pairs = "request"
 exec: output_pairs = "(null)"
 exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec) 
Module: Loaded expr 
Module: Instantiated expr (expr) 
Module: Loaded PAP 
 pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap) 
Module: Loaded CHAP 
Module: Instantiated chap (chap) 
Module: Loaded MS-CHAP 
 mschap: use_mppe = yes
 mschap: require_encryption = no
 mschap: require_strong = no
 mschap: with_ntdomain_hack = yes
 mschap: passwd = "(null)"
 mschap: authtype = "MS-CHAP"
 mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap) 
Module: Loaded System 
 unix: cache = no
 unix: passwd = "(null)"
 unix: shadow = "(null)"
 unix: group = "(null)"
 unix: radwtmp = "/var/log/radius/radwtmp"
 unix: usegroup = no
 unix: cache_reload = 600
Module: Instantiated unix (unix) 
Module: Loaded eap 
 eap: default_eap_type = "peap"
 eap: timer_expire = 60
 eap: ignore_unknown_eap_types = no
 eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
 gtc: challenge = "Password: "
 gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
 tls: rsa_key_exchange = no
 tls: dh_key_exchange = yes
 tls: rsa_key_length = 512
 tls: dh_key_length = 512
 tls: verify_depth = 0
 tls: CA_path = "(null)"
 tls: pem_file_type = yes
 tls: private_key_file = "/usr/local/etc/raddb/certs/cert-srv.pem"
 tls: certificate_file = "/usr/local/etc/raddb/certs/cert-srv.pem"
 tls: CA_file = "/usr/local/etc/raddb/certs/demoCA/cacert.pem"
 tls: private_key_password = "whatever"
 tls: dh_file = "/usr/local/etc/raddb/certs/dh"
 tls: random_file = "/usr/local/etc/raddb/certs/random"
 tls: fragment_size = 1024
 tls: include_length = yes
 tls: check_crl = no
 tls: check_cert_cn = "(null)"
rlm_eap: Loaded and initialized type tls
 peap: default_eap_type = "mschapv2"
 peap: copy_request_to_tunnel = no
 peap: use_tunneled_reply = no
 peap: proxy_tunneled_request_as_eap = yes
rlm_eap: Loaded and initialized type peap
 mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap) 
Module: Loaded preprocess 
 preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"
 preprocess: hints = "/usr/local/etc/raddb/hints"
 preprocess: with_ascend_hack = no
 preprocess: ascend_channels_per_line = 23
 preprocess: with_ntdomain_hack = no
 preprocess: with_specialix_jetstream_hack = no
 preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess) 
Module: Loaded realm 
 realm: format = "suffix"
 realm: delimiter = "@"
 realm: ignore_default = no
 realm: ignore_null = no
Module: Instantiated realm (suffix) 
 realm: format = "prefix"
 realm: delimiter = "\"
 realm: ignore_default = no
 realm: ignore_null = no
Module: Instantiated realm (ntdomain) 
Module: Loaded files 
 files: usersfile = "/usr/local/etc/raddb/users"
 files: acctusersfile = "/usr/local/etc/raddb/acct_users"
 files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
 files: compat = "no"
Module: Instantiated files (files) 
Module: Loaded passwd 
 passwd: filename = "/usr/local/samba/private/smbpasswd"
 passwd: format = "*User-Name::LM-Password:NT-Password:SMB-Account-CTRL-TEXT::"
 passwd: authtype = "MS-CHAP"
 passwd: delimiter = ":"
 passwd: ignorenislike = no
 passwd: ignoreempty = yes
 passwd: allowmultiplekeys = no
 passwd: hashsize = 100
rlm_passwd: nfields: 7 keyfield 0(User-Name) listable: no
Module: Instantiated passwd (etc_smbpasswd) 
Module: Loaded Acct-Unique-Session-Id 
 acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique) 
Module: Loaded detail 
 detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
 detail: detailperm = 384
 detail: dirperm = 493
 detail: locking = no
Module: Instantiated detail (detail) 
Module: Loaded radutmp 
 radutmp: filename = "/var/log/radius/radutmp"
 radutmp: username = "%{User-Name}"
 radutmp: case_sensitive = yes
 radutmp: check_with_nas = yes
 radutmp: perm = 384
 radutmp: callerid = yes
Module: Instantiated radutmp (radutmp) 
Listening on authentication *:1812
Listening on accounting *:1813
Listening on proxy *:1814
Ready to process requests.
rad_recv: Access-Request packet from host 89.89.104.42:3902, id=0, length=204
	Message-Authenticator = 0xef6cb9f17efb35e45ea3eda94566231a
	Service-Type = Framed-User
	User-Name = "ADMINNB\\jseymour"
	Framed-MTU = 1488
	Called-Station-Id = "00-09-5B-E8-51-4B:fhWLAN01a"
	Calling-Station-Id = "00-0E-35-BC-2D-23"
	NAS-Identifier = "FWAG114"
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 54Mbps 802.11a"
	EAP-Message = 0x020000150141444d494e4e425c6a7365796d6f7572
	NAS-IP-Address = 0.0.0.0
	NAS-Port = 1
	NAS-Port-Id = "STA port # 1"
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  modcall[authorize]: module "chap" returns noop for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
    rlm_realm: No '@' in User-Name = "ADMINNB\jseymour", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 0
    rlm_realm: Looking up realm "ADMINNB" for User-Name = "ADMINNB\jseymour"
    rlm_realm: No such realm "ADMINNB"
  modcall[authorize]: module "ntdomain" returns noop for request 0
  rlm_eap: EAP packet type response id 0 length 21
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 0
    users: Matched entry DEFAULT at line 156
    users: Matched entry DEFAULT at line 175
  modcall[authorize]: module "files" returns ok for request 0
  modcall[authorize]: module "etc_smbpasswd" returns notfound for request 0
modcall: group authorize returns updated for request 0
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
  rlm_eap: EAP Identity
  rlm_eap: processing type tls
  rlm_eap_tls: Initiate
  rlm_eap_tls: Start returned 1
  modcall[authenticate]: module "eap" returns handled for request 0
modcall: group authenticate returns handled for request 0
Sending Access-Challenge of id 0 to 89.89.104.42:3902
	Framed-IP-Address = 255.255.255.254
	Framed-MTU = 576
	Service-Type = Framed-User
	EAP-Message = 0x010100061920
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xa125a6fbefce47f56cd3dfd95b4c8f22
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 89.89.104.42:3902, id=1, length=281
	Message-Authenticator = 0x5c2ec51e8034d04d9c18040974dfc150
	Service-Type = Framed-User
	User-Name = "ADMINNB\\jseymour"
	Framed-MTU = 1488
	State = 0xa125a6fbefce47f56cd3dfd95b4c8f22
	Called-Station-Id = "00-09-5B-E8-51-4B:fhWLAN01a"
	Calling-Station-Id = "00-0E-35-BC-2D-23"
	NAS-Identifier = "FWAG114"
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 54Mbps 802.11a"
	EAP-Message = 0x0201005019800000004616030100410100003d0301424ae64e18e56d34ffa2ace00226d952bb6afd94e6d2d29fee6ac0fa3b4555cb00001600040005000a000900640062000300060013001200630100
	NAS-IP-Address = 0.0.0.0
	NAS-Port = 1
	NAS-Port-Id = "STA port # 1"
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
  modcall[authorize]: module "preprocess" returns ok for request 1
  modcall[authorize]: module "chap" returns noop for request 1
  modcall[authorize]: module "mschap" returns noop for request 1
    rlm_realm: No '@' in User-Name = "ADMINNB\jseymour", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 1
    rlm_realm: Looking up realm "ADMINNB" for User-Name = "ADMINNB\jseymour"
    rlm_realm: No such realm "ADMINNB"
  modcall[authorize]: module "ntdomain" returns noop for request 1
  rlm_eap: EAP packet type response id 1 length 80
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 1
    users: Matched entry DEFAULT at line 156
    users: Matched entry DEFAULT at line 175
  modcall[authorize]: module "files" returns ok for request 1
  modcall[authorize]: module "etc_smbpasswd" returns notfound for request 1
modcall: group authorize returns updated for request 1
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls:  Length Included
  eaptls_verify returned 11 
    (other): before/accept initialization 
    TLS_accept: before/accept initialization 
  rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello  
    TLS_accept: SSLv3 read client hello A 
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello  
    TLS_accept: SSLv3 write server hello A 
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 0694], Certificate  
    TLS_accept: SSLv3 write certificate A 
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone  
    TLS_accept: SSLv3 write server done A 
    TLS_accept: SSLv3 flush data 
    TLS_accept:error in SSLv3 read client certificate A 
In SSL Handshake Phase 
In SSL Accept mode  
  eaptls_process returned 13 
  rlm_eap_peap: EAPTLS_HANDLED
  modcall[authenticate]: module "eap" returns handled for request 1
modcall: group authenticate returns handled for request 1
Sending Access-Challenge of id 1 to 89.89.104.42:3902
	Framed-IP-Address = 255.255.255.254
	Framed-MTU = 576
	Service-Type = Framed-User
	EAP-Message = 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
	EAP-Message = 0x7274696669636174653121301f06092a864886f70d0109011612636c69656e74406578616d706c652e636f6d301e170d3034303132353133323631305a170d3035303132343133323631305a30819b310b30090603550406130243413111300f0603550408130850726f76696e63653112301006035504071309536f6d65204369747931153013060355040a130c4f7267616e697a6174696f6e31123010060355040b13096c6f63616c686f73743119301706035504031310526f6f74206365727469666963617465311f301d06092a864886f70d0109011610726f6f74406578616d706c652e636f6d30819f300d06092a864886f70d010101050003
	EAP-Message = 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
	EAP-Message = 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
	EAP-Message = 0x652e636f6d301e170d3034303132353133323630375a
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x16beacbed660fa985bc63b7c4b23c16e
Finished request 1
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 89.89.104.42:3902, id=2, length=207
	Message-Authenticator = 0x0dbc3e4901f0fb1224bc7fe861fe362d
	Service-Type = Framed-User
	User-Name = "ADMINNB\\jseymour"
	Framed-MTU = 1488
	State = 0x16beacbed660fa985bc63b7c4b23c16e
	Called-Station-Id = "00-09-5B-E8-51-4B:fhWLAN01a"
	Calling-Station-Id = "00-0E-35-BC-2D-23"
	NAS-Identifier = "FWAG114"
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 54Mbps 802.11a"
	EAP-Message = 0x020200061900
	NAS-IP-Address = 0.0.0.0
	NAS-Port = 1
	NAS-Port-Id = "STA port # 1"
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
  modcall[authorize]: module "preprocess" returns ok for request 2
  modcall[authorize]: module "chap" returns noop for request 2
  modcall[authorize]: module "mschap" returns noop for request 2
    rlm_realm: No '@' in User-Name = "ADMINNB\jseymour", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 2
    rlm_realm: Looking up realm "ADMINNB" for User-Name = "ADMINNB\jseymour"
    rlm_realm: No such realm "ADMINNB"
  modcall[authorize]: module "ntdomain" returns noop for request 2
  rlm_eap: EAP packet type response id 2 length 6
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 2
    users: Matched entry DEFAULT at line 156
    users: Matched entry DEFAULT at line 175
  modcall[authorize]: module "files" returns ok for request 2
  modcall[authorize]: module "etc_smbpasswd" returns notfound for request 2
modcall: group authorize returns updated for request 2
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 2
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
  rlm_eap_tls: ack handshake fragment handler
  eaptls_verify returned 1 
  eaptls_process returned 13 
  rlm_eap_peap: EAPTLS_HANDLED
  modcall[authenticate]: module "eap" returns handled for request 2
modcall: group authenticate returns handled for request 2
Sending Access-Challenge of id 2 to 89.89.104.42:3902
	Framed-IP-Address = 255.255.255.254
	Framed-MTU = 576
	Service-Type = Framed-User
	EAP-Message = 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
	EAP-Message = 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
	EAP-Message = 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
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x25acd4adcc1184af688ca59b055ea723
Finished request 2
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 89.89.104.42:3902, id=3, length=393
	Message-Authenticator = 0x67542c5ab495440f26d0f1aefcfd8377
	Service-Type = Framed-User
	User-Name = "ADMINNB\\jseymour"
	Framed-MTU = 1488
	State = 0x25acd4adcc1184af688ca59b055ea723
	Called-Station-Id = "00-09-5B-E8-51-4B:fhWLAN01a"
	Calling-Station-Id = "00-0E-35-BC-2D-23"
	NAS-Identifier = "FWAG114"
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 54Mbps 802.11a"
	EAP-Message = 0x020300c01980000000b6160301008610000082008091f7fd44b9f8aac0e806a52c493a686b5f88a07dcc8af6a2ff1d4abfba912013d00dc4821ba87fb0d67cc78cf4bd8e723f114dbe18674b015521efc94c2e115ed113975e4facb4ab83937ceaa8a552514c2ac228ec1364c5b4905d555d1047f01aff91503ef367fdd0158edab46a6cce265cb2e5d7c56e9e905a18fc54d2ca2314030100010116030100200e0073c601723dff8572d88aed2a152950cbcd4ed3e365a066ab33ef9fd14a22
	NAS-IP-Address = 0.0.0.0
	NAS-Port = 1
	NAS-Port-Id = "STA port # 1"
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 3
  modcall[authorize]: module "preprocess" returns ok for request 3
  modcall[authorize]: module "chap" returns noop for request 3
  modcall[authorize]: module "mschap" returns noop for request 3
    rlm_realm: No '@' in User-Name = "ADMINNB\jseymour", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 3
    rlm_realm: Looking up realm "ADMINNB" for User-Name = "ADMINNB\jseymour"
    rlm_realm: No such realm "ADMINNB"
  modcall[authorize]: module "ntdomain" returns noop for request 3
  rlm_eap: EAP packet type response id 3 length 192
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 3
    users: Matched entry DEFAULT at line 156
    users: Matched entry DEFAULT at line 175
  modcall[authorize]: module "files" returns ok for request 3
  modcall[authorize]: module "etc_smbpasswd" returns notfound for request 3
modcall: group authorize returns updated for request 3
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 3
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls:  Length Included
  eaptls_verify returned 11 
  rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange  
    TLS_accept: SSLv3 read client key exchange A 
  rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001]  
  rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished  
    TLS_accept: SSLv3 read finished A 
  rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001]  
    TLS_accept: SSLv3 write change cipher spec A 
  rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished  
    TLS_accept: SSLv3 write finished A 
    TLS_accept: SSLv3 flush data 
    (other): SSL negotiation finished successfully 
SSL Connection Established 
  eaptls_process returned 13 
  rlm_eap_peap: EAPTLS_HANDLED
  modcall[authenticate]: module "eap" returns handled for request 3
modcall: group authenticate returns handled for request 3
Sending Access-Challenge of id 3 to 89.89.104.42:3902
	Framed-IP-Address = 255.255.255.254
	Framed-MTU = 576
	Service-Type = Framed-User
	EAP-Message = 0x01040031190014030100010116030100205f13d880b76188b5a3bcef5cb5c6a0cdc3e5f75372b5de1c951c7a5f7927c6fb
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x14af1b7e76280617829fbe26ca4c147c
Finished request 3
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 89.89.104.42:3902, id=4, length=207
	Message-Authenticator = 0x9bc66b51af5b77a0baf3f7d2ac0f6ec4
	Service-Type = Framed-User
	User-Name = "ADMINNB\\jseymour"
	Framed-MTU = 1488
	State = 0x14af1b7e76280617829fbe26ca4c147c
	Called-Station-Id = "00-09-5B-E8-51-4B:fhWLAN01a"
	Calling-Station-Id = "00-0E-35-BC-2D-23"
	NAS-Identifier = "FWAG114"
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 54Mbps 802.11a"
	EAP-Message = 0x020400061900
	NAS-IP-Address = 0.0.0.0
	NAS-Port = 1
	NAS-Port-Id = "STA port # 1"
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 4
  modcall[authorize]: module "preprocess" returns ok for request 4
  modcall[authorize]: module "chap" returns noop for request 4
  modcall[authorize]: module "mschap" returns noop for request 4
    rlm_realm: No '@' in User-Name = "ADMINNB\jseymour", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 4
    rlm_realm: Looking up realm "ADMINNB" for User-Name = "ADMINNB\jseymour"
    rlm_realm: No such realm "ADMINNB"
  modcall[authorize]: module "ntdomain" returns noop for request 4
  rlm_eap: EAP packet type response id 4 length 6
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 4
    users: Matched entry DEFAULT at line 156
    users: Matched entry DEFAULT at line 175
  modcall[authorize]: module "files" returns ok for request 4
  modcall[authorize]: module "etc_smbpasswd" returns notfound for request 4
modcall: group authorize returns updated for request 4
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 4
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
  rlm_eap_tls: ack handshake is finished
  eaptls_verify returned 3 
  eaptls_process returned 3 
  rlm_eap_peap: EAPTLS_SUCCESS
  modcall[authenticate]: module "eap" returns handled for request 4
modcall: group authenticate returns handled for request 4
Sending Access-Challenge of id 4 to 89.89.104.42:3902
	Framed-IP-Address = 255.255.255.254
	Framed-MTU = 576
	Service-Type = Framed-User
	EAP-Message = 0x0105002019001703010015fa714d21bd3b3d02a132910d6bf4405a1ea9c43806
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x8866b5b4bf26b1c630179fbd1203dcc4
Finished request 4
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 89.89.104.42:3902, id=5, length=245
	Message-Authenticator = 0xebc3764a46e1d154afc504aea7ea77e0
	Service-Type = Framed-User
	User-Name = "ADMINNB\\jseymour"
	Framed-MTU = 1488
	State = 0x8866b5b4bf26b1c630179fbd1203dcc4
	Called-Station-Id = "00-09-5B-E8-51-4B:fhWLAN01a"
	Calling-Station-Id = "00-0E-35-BC-2D-23"
	NAS-Identifier = "FWAG114"
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 54Mbps 802.11a"
	EAP-Message = 0x0205002c19001703010021814d98bd9cbfb9bcceb6bd5b6a4c1cf38c2c38a5911a252443f08eaca1ab567e56
	NAS-IP-Address = 0.0.0.0
	NAS-Port = 1
	NAS-Port-Id = "STA port # 1"
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 5
  modcall[authorize]: module "preprocess" returns ok for request 5
  modcall[authorize]: module "chap" returns noop for request 5
  modcall[authorize]: module "mschap" returns noop for request 5
    rlm_realm: No '@' in User-Name = "ADMINNB\jseymour", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 5
    rlm_realm: Looking up realm "ADMINNB" for User-Name = "ADMINNB\jseymour"
    rlm_realm: No such realm "ADMINNB"
  modcall[authorize]: module "ntdomain" returns noop for request 5
  rlm_eap: EAP packet type response id 5 length 44
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 5
    users: Matched entry DEFAULT at line 156
    users: Matched entry DEFAULT at line 175
  modcall[authorize]: module "files" returns ok for request 5
  modcall[authorize]: module "etc_smbpasswd" returns notfound for request 5
modcall: group authorize returns updated for request 5
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 5
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7 
  rlm_eap_tls: Done initial handshake
  eaptls_process returned 7 
  rlm_eap_peap: EAPTLS_OK
  rlm_eap_peap: Session established.  Decoding tunneled attributes.
  rlm_eap_peap: Identity - ADMINNB\jseymour
  rlm_eap_peap: Tunneled data is valid.
  PEAP: Got tunneled EAP-Message
	EAP-Message = 0x020500150141444d494e4e425c6a7365796d6f7572
  PEAP: Got tunneled identity of ADMINNB\jseymour
  PEAP: Setting default EAP type for tunneled EAP session.
  PEAP: Setting User-Name to ADMINNB\jseymour
  PEAP: Sending tunneled request
	EAP-Message = 0x020500150141444d494e4e425c6a7365796d6f7572
	FreeRADIUS-Proxied-To = 127.0.0.1
	User-Name = "ADMINNB\\jseymour"
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 5
  modcall[authorize]: module "preprocess" returns ok for request 5
  modcall[authorize]: module "chap" returns noop for request 5
  modcall[authorize]: module "mschap" returns noop for request 5
    rlm_realm: No '@' in User-Name = "ADMINNB\jseymour", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 5
    rlm_realm: Looking up realm "ADMINNB" for User-Name = "ADMINNB\jseymour"
    rlm_realm: No such realm "ADMINNB"
  modcall[authorize]: module "ntdomain" returns noop for request 5
  rlm_eap: EAP packet type response id 5 length 21
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 5
    users: Matched entry DEFAULT at line 156
  modcall[authorize]: module "files" returns ok for request 5
  modcall[authorize]: module "etc_smbpasswd" returns notfound for request 5
modcall: group authorize returns updated for request 5
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 5
  rlm_eap: EAP Identity
  rlm_eap: processing type mschapv2
rlm_eap_mschapv2: Issuing Challenge
  modcall[authenticate]: module "eap" returns handled for request 5
modcall: group authenticate returns handled for request 5
  PEAP: Got tunneled reply RADIUS code 11
	EAP-Message = 0x0106002a1a010600251069919feefc82999d45ee53eab907d2b741444d494e4e425c6a7365796d6f7572
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xe23c30f5c2e2dbc82c4869241bef694d
  PEAP: Processing from tunneled session code 1de7d0 11
	EAP-Message = 0x0106002a1a010600251069919feefc82999d45ee53eab907d2b741444d494e4e425c6a7365796d6f7572
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xe23c30f5c2e2dbc82c4869241bef694d
  PEAP: Got tunneled Access-Challenge
  modcall[authenticate]: module "eap" returns handled for request 5
modcall: group authenticate returns handled for request 5
Sending Access-Challenge of id 5 to 89.89.104.42:3902
	Framed-IP-Address = 255.255.255.254
	Framed-MTU = 576
	Service-Type = Framed-User
	EAP-Message = 0x01060041190017030100360f3e23e915582c0f6a13088547b9a293516ff68df6d3df6e1caccf548dde5fe4c4c1516ecf5232ad90cbc201536e3c2769464569c1cc
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0xe20be0ed4fd1cf55e623f3514b4dc64f
Finished request 5
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 89.89.104.42:3902, id=6, length=291
	Message-Authenticator = 0xfca46beb906ec274f028e61d6bafb912
	Service-Type = Framed-User
	User-Name = "ADMINNB\\jseymour"
	Framed-MTU = 1488
	State = 0xe20be0ed4fd1cf55e623f3514b4dc64f
	Called-Station-Id = "00-09-5B-E8-51-4B:fhWLAN01a"
	Calling-Station-Id = "00-0E-35-BC-2D-23"
	NAS-Identifier = "FWAG114"
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 54Mbps 802.11a"
	EAP-Message = 0x0206005a1900170301004f75e90c02a82303b9d08482f0d3e4e1ebd9617a2d98b26cfafa9dd270e2e7a1412573c8d32f9cb3caddfd2b40a4ccc0cbf2ff9b0f367d9d6a4063f0ea50a6770e2c5873adabca517605d8fe11ed3235
	NAS-IP-Address = 0.0.0.0
	NAS-Port = 1
	NAS-Port-Id = "STA port # 1"
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 6
  modcall[authorize]: module "preprocess" returns ok for request 6
  modcall[authorize]: module "chap" returns noop for request 6
  modcall[authorize]: module "mschap" returns noop for request 6
    rlm_realm: No '@' in User-Name = "ADMINNB\jseymour", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 6
    rlm_realm: Looking up realm "ADMINNB" for User-Name = "ADMINNB\jseymour"
    rlm_realm: No such realm "ADMINNB"
  modcall[authorize]: module "ntdomain" returns noop for request 6
  rlm_eap: EAP packet type response id 6 length 90
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 6
    users: Matched entry DEFAULT at line 156
    users: Matched entry DEFAULT at line 175
  modcall[authorize]: module "files" returns ok for request 6
  modcall[authorize]: module "etc_smbpasswd" returns notfound for request 6
modcall: group authorize returns updated for request 6
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 6
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7 
  rlm_eap_tls: Done initial handshake
  eaptls_process returned 7 
  rlm_eap_peap: EAPTLS_OK
  rlm_eap_peap: Session established.  Decoding tunneled attributes.
  rlm_eap_peap: EAP type mschapv2
  rlm_eap_peap: Tunneled data is valid.
  PEAP: Got tunneled EAP-Message
	EAP-Message = 0x020600431a0206003e31ed5ba74d31f0b874b8c94f3a4287d6ca0000000000000000ed0f1a3e5a0cfa10e375b15a7c053b6219628cf64b54c1ba006a7365796d6f7572
  PEAP: Setting User-Name to ADMINNB\jseymour
  PEAP: Adding old state with e2 3c
  PEAP: Sending tunneled request
	EAP-Message = 0x020600431a0206003e31ed5ba74d31f0b874b8c94f3a4287d6ca0000000000000000ed0f1a3e5a0cfa10e375b15a7c053b6219628cf64b54c1ba006a7365796d6f7572
	FreeRADIUS-Proxied-To = 127.0.0.1
	User-Name = "ADMINNB\\jseymour"
	State = 0xe23c30f5c2e2dbc82c4869241bef694d
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 6
  modcall[authorize]: module "preprocess" returns ok for request 6
  modcall[authorize]: module "chap" returns noop for request 6
  modcall[authorize]: module "mschap" returns noop for request 6
    rlm_realm: No '@' in User-Name = "ADMINNB\jseymour", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 6
    rlm_realm: Looking up realm "ADMINNB" for User-Name = "ADMINNB\jseymour"
    rlm_realm: No such realm "ADMINNB"
  modcall[authorize]: module "ntdomain" returns noop for request 6
  rlm_eap: EAP packet type response id 6 length 67
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 6
    users: Matched entry DEFAULT at line 156
  modcall[authorize]: module "files" returns ok for request 6
  modcall[authorize]: module "etc_smbpasswd" returns notfound for request 6
modcall: group authorize returns updated for request 6
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 6
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/mschapv2
  rlm_eap: processing type mschapv2
  Processing the authenticate section of radiusd.conf
modcall: entering group Auth-Type for request 6
  rlm_mschap: No User-Password configured.  Cannot create LM-Password.
  rlm_mschap: No User-Password configured.  Cannot create NT-Password.
  rlm_mschap: Told to do MS-CHAPv2 for jseymour with NT-Password
  rlm_mschap: FAILED: No NT/LM-Password.  Cannot perform authentication.
  rlm_mschap: FAILED: MS-CHAP2-Response is incorrect
  modcall[authenticate]: module "mschap" returns reject for request 6
modcall: group Auth-Type returns reject for request 6
  rlm_eap: Freeing handler
  modcall[authenticate]: module "eap" returns reject for request 6
modcall: group authenticate returns reject for request 6
auth: Failed to validate the user.
  PEAP: Got tunneled reply RADIUS code 3
	MS-CHAP-Error = "\006E=691 R=1"
	EAP-Message = 0x04060004
	Message-Authenticator = 0x00000000000000000000000000000000
  PEAP: Processing from tunneled session code 1e7770 3
	MS-CHAP-Error = "\006E=691 R=1"
	EAP-Message = 0x04060004
	Message-Authenticator = 0x00000000000000000000000000000000
  PEAP: Tunneled authentication was rejected.
  rlm_eap_peap: FAILURE
  modcall[authenticate]: module "eap" returns handled for request 6
modcall: group authenticate returns handled for request 6
Sending Access-Challenge of id 6 to 89.89.104.42:3902
	Framed-IP-Address = 255.255.255.254
	Framed-MTU = 576
	Service-Type = Framed-User
	EAP-Message = 0x010700261900170301001b13b7b43d9c3232f783da72e1d155e90e53703929f7e3b92b61d1cf
	Message-Authenticator = 0x00000000000000000000000000000000
	State = 0x2ccc0364a77f11c9b8b3de7b5623c52f
Finished request 6
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 89.89.104.42:3902, id=7, length=239
	Message-Authenticator = 0x8e0dfbdb1e95b2dc9a47bb356bb16807
	Service-Type = Framed-User
	User-Name = "ADMINNB\\jseymour"
	Framed-MTU = 1488
	State = 0x2ccc0364a77f11c9b8b3de7b5623c52f
	Called-Station-Id = "00-09-5B-E8-51-4B:fhWLAN01a"
	Calling-Station-Id = "00-0E-35-BC-2D-23"
	NAS-Identifier = "FWAG114"
	NAS-Port-Type = Wireless-802.11
	Connect-Info = "CONNECT 54Mbps 802.11a"
	EAP-Message = 0x020700261900170301001b148756c8ccf43902c830f55b6723397a2614e95eb06c0cd1a91356
	NAS-IP-Address = 0.0.0.0
	NAS-Port = 1
	NAS-Port-Id = "STA port # 1"
  Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 7
  modcall[authorize]: module "preprocess" returns ok for request 7
  modcall[authorize]: module "chap" returns noop for request 7
  modcall[authorize]: module "mschap" returns noop for request 7
    rlm_realm: No '@' in User-Name = "ADMINNB\jseymour", looking up realm NULL
    rlm_realm: No such realm "NULL"
  modcall[authorize]: module "suffix" returns noop for request 7
    rlm_realm: Looking up realm "ADMINNB" for User-Name = "ADMINNB\jseymour"
    rlm_realm: No such realm "ADMINNB"
  modcall[authorize]: module "ntdomain" returns noop for request 7
  rlm_eap: EAP packet type response id 7 length 38
  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
  modcall[authorize]: module "eap" returns updated for request 7
    users: Matched entry DEFAULT at line 156
    users: Matched entry DEFAULT at line 175
  modcall[authorize]: module "files" returns ok for request 7
  modcall[authorize]: module "etc_smbpasswd" returns notfound for request 7
modcall: group authorize returns updated for request 7
  rad_check_password:  Found Auth-Type EAP
auth: type "EAP"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 7
  rlm_eap: Request found, released from the list
  rlm_eap: EAP/peap
  rlm_eap: processing type peap
  rlm_eap_peap: Authenticate
  rlm_eap_tls: processing TLS
  eaptls_verify returned 7 
  rlm_eap_tls: Done initial handshake
  eaptls_process returned 7 
  rlm_eap_peap: EAPTLS_OK
  rlm_eap_peap: Session established.  Decoding tunneled attributes.
  rlm_eap_peap: Received EAP-TLV response.
  rlm_eap_peap: Tunneled data is valid.
  rlm_eap_peap:  Had sent TLV failure, rejecting.
 rlm_eap: Handler failed in EAP/peap
  rlm_eap: Failed in EAP select
  modcall[authenticate]: module "eap" returns invalid for request 7
modcall: group authenticate returns invalid for request 7
auth: Failed to validate the user.
Delaying request 7 for 1 seconds
Finished request 7
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 89.89.104.42:3902, id=7, length=239
Sending Access-Reject of id 7 to 89.89.104.42:3902
	EAP-Message = 0x04070004
	Message-Authenticator = 0x00000000000000000000000000000000
--- Walking the entire request list ---
Waking up in 3 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 0 with timestamp 424ae653
Cleaning up request 1 ID 1 with timestamp 424ae653
Cleaning up request 2 ID 2 with timestamp 424ae653
Cleaning up request 3 ID 3 with timestamp 424ae653
Cleaning up request 4 ID 4 with timestamp 424ae653
Cleaning up request 5 ID 5 with timestamp 424ae653
Cleaning up request 6 ID 6 with timestamp 424ae653
Cleaning up request 7 ID 7 with timestamp 424ae653
Nothing to do.  Sleeping until we see a request.